Tunturi E3 ユーザーズマニュアル

When you turn the user interface on, the display shows the following 
exercise parameters:

1.       Effi ciency (W)
::        Figure indicates exercise effi ciency in Watts, which depends on 
          pedalling speed and resistance adjustment.

2.       Energy consumption (kcal/kJ)
::        Displays cumulative energy consumption (0-999); default setting 
          is kcal.

3.       Speed (rpm / km/h / mph) 
::        Default setting is rpm (pedal revolutions / minute).

4.       Pulse
::        Heart rate transmitter belt or an ear sensor is required.
::        If the user interface does not receive a heart-rate signal, - - is 
          displayed instead of the heart rate.

NOTE! Always disconnect the ear sensor from the user interface if using 
a heart rate transmitter belt; the ear sensor will interfere with the heart 
rate transmitter.

5.       Time
::        Displays the exercise time elapsed between 0:00 - 59:59 minutes 
          in 1 second increments and between 1:00 - 10:00 hours in 
          1 minute increments.
::        Time display stops if speed falls to zero.

6.       Distance (km / miles)
::        Default display setting is km. 
::        Displays the distance travelled during the workout in km (or 
          miles) to two decimal points up to 9.99 km (or miles) and with 
          one decimal point up to 99.9.

MODE includes constant resistance, constant effort and constant heart-
rate workouts. The user interface automatically starts from the constant 
resistance workout.

Press TEST to measure recovery pulse rate, which indicates your level 
of fi tness.

Press the Reset key for more than one second to display the cumulative 
values. Pressing Reset always resets the value on the display.

Use the setting keys (-/+) to adjust resistance, effort and heart-rate for 
the workout.