Turbo Air TBC-24SD, 24SB ユーザーズマニュアル

10

• Thermostat set too cold.

• There is a power connection

failure problem.

• The unit is in sunlight or near a

heating device.

• Product was put in warm.
• The unit lid is opened too

frequently or left open too long.

• The temp. dial is not on the

correct position.

• The condenser is clogged.

• The floor is too weak or the

leveling feet are set incorrectly.

• The backside of the unit is too

close to the wall.

• High-moisture air can produce

dewdrops during rainy seasons.

• The lid is opened too frequently

or left open too long.

• Turn the temperature dial to a

warmer setting.

• Check the power cord to make

sure the unit is pluged in it
correctly.

• Move out of sunlight or away

from heater.

• Check the condition of stored

product.

• Check the position of the temp

control dial.

• Check the installation.

• Wipe with a dry cloth.

• Keep the lid closed to remove

dewdrops.

• A water-flowing sound can be heard when the compressor stops.

This is the sound of REFRIGERANT flowing.

• The compressor does not run during the defrost cycle.