JVC TH-C20 ユーザーズマニュアル

NOTE

• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.

7 To set the manufacturer’s code

Slide the remote control mode selector
to TV.

Press and hold F TV.

Keep the button pressed until step 4 is finished.

Press ENTER.

Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).

Examples:
For a Hitachi TV: Press 1, then 0.
For a Toshiba TV: Press 0, then 8.

“01” is the initial setting.

Release F TV.

If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.

7 Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available:
F TV:

Turns TV on and off.

TV VOL +/–

Adjusts the volume.

TV/VIDEO

Selects the input mode (either TV or
VIDEO).

CH +/–

Changes the channels.

1-10, 0,

h10 (100+): Selects the channel.

TV RETURN

Alternates between the previously selected
channel and the current channel.

NOTE

• The operating buttons may differ depending on manufacturers.

7 To set the manufacturer’s code

Slide the remote control mode selector
to VCR/DBS.

Press DBS.

Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

Press ENTER.

The buttons described below are used on pages 12 and 13.

Operating the TV

Remote
control mode
selector

Number

buttons

(play button)

Manufacturer

Code

Manufacturer

Code

JVC

01*

Samsung

Hitachi

Sanyo

13, 14

Magnavox

Sharp

Mitsubishi

Sony

Panasonic

04, 11

Toshiba

Philips

Zenith

RCA

Operating the DBS tuner or
CATV converter

Continued on the next page

Operating external components with the remote control

TH-C20-30[JC]5.book Page 12 Thursday, January 12, 2006 11:29 AM