Konica Minolta bizhub C652DS ユーザーズマニュアル
bizhub C652/C652DS/C552/C552DS/C452
7-13
7.1
System Settings
7
Leading Edge Adjustment
Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed
direction).
direction).
1
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Leading Edge Adjustment].
ö [Printer Adjustment] ö [Leading Edge Adjustment].
% To adjust the starting print position at the leading edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].
2
Select a paper type to be adjusted.
3
Load the paper into the bypass tray.
4
Press the [Start] key.
A test pattern is printed.
5
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 4.2 mm.
pattern to the edge of the paper (a) is 4.2 mm.
% Press [+] or [-] to adjust the width.
Press the [Start] key to print a test pattern.
6
Press [OK].
Centering
Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction).
0
Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the bypass tray.
1
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Centering].
ö [Printer Adjustment] ö [Centering].
% To adjust the starting print position at the left edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Centering (Duplex 2nd Side)].
2
Select a paper tray to be adjusted.
3
Press the [Start] kay.
A test pattern is printed.
Color Registration Adjust
0 dot
Prior Detection Setting
Yes
Warning Display: TYPE1
Detection Level: Std.
Warning Display: TYPE1
Detection Level: Std.
Prior Detection Setting
(front)
(front)
Yes
Warning Display: TYPE1
Detection Level: Std.
Warning Display: TYPE1
Detection Level: Std.
Prior Detection Setting
(back)
(back)
Feed Cleaning Settings
Remove
Non-Image Area Erase Op-
eration Settings
eration Settings
Erase Operation: Specify
Erase Method: Rectangular
Original Density: 3
Erase Method: Rectangular
Original Density: 3
Factory default
a
a:4.2mm