Konica Minolta bizhub C652DS 用户手册

bizhub C652/C652DS/C552/C552DS/C452

7-13

Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed 
direction).

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Printer Adjustment] ö [Leading Edge Adjustment].

% To adjust the starting print position at the leading edge of the second side for 2-sided printing (with 

respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].

Select a paper type to be adjusted.

Load the paper into the bypass tray.

Press the [Start] key.

A test pattern is printed.

Check that the distance from the starting print position of the test 
pattern to the edge of the paper (a) is 4.2 mm. 

% Press [+] or [-] to adjust the width. 

Press the [Start] key to print a test pattern.

Press [OK].

Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction).

0

Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the bypass tray.

Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] 
ö [Printer Adjustment] ö [Centering].

% To adjust the starting print position at the left edge of the second side for 2-sided printing (with 

respect to the paper feed direction), press [Centering (Duplex 2nd Side)].

Select a paper tray to be adjusted.

Press the [Start] kay.

A test pattern is printed.

Color Registration Adjust

0 dot

Prior Detection Setting

Yes
Warning Display: TYPE1
Detection Level: Std.

Prior Detection Setting 
(front)

Yes
Warning Display: TYPE1
Detection Level: Std.

Prior Detection Setting 
(back)

Feed Cleaning Settings

Remove

Non-Image Area Erase Op-
eration Settings

Erase Operation: Specify
Erase Method: Rectangular
Original Density: 3

a

a:4.2mm