Konica Minolta bizhub C652DS ユーザーズマニュアル

bizhub C652/C652DS/C552/C552DS/C452

9-10

Now Downloading Program 
Data from the Firmware server.

(1) CS Remote Care was activat-
ed by your service representa-
tive.
(2) Internet ISW is being down-
loaded.

Do not turn off the sub power 
switch while this message is dis-
played.
After turning off the sub power 
switch, turn off the main power 
switch, and then contact your 
service representative.

Authentication information en-
tered is invalid, due to failed ac-
cess attempts. 
Contact the administrator.

The authentication information 
has become invalid since the au-
thentication attempts have failed 
the specified number of times.

Contact the administrator of the 
machine.

Due to failed access attempts, 
the current administrator pass-
word is invalid.

The administrator password has 
become invalid since the authen-
tication attempts have failed the 
specified number of times.

Turn the machine off, then on 
again.
Turn off the main power switch, 
and then wait at least 10 sec-
onds before turning it on again.

The job log has reached the 
maximum allowed.
Contact the administrator.

The write area of the job log has 
reached the maximum allowed.

Obtain the job log using Page-
Scope Web Connection.

No Animation Guide data availa-
ble. Contact your administrator.

Animation guide data is not in-
stalled.

For details on installing anima-
tion guide data, contact your 
service representative.

Verify that external keyboard is 
properly connected. It may not 
be connected or multiple key-
boards may be connected.

The compact keyboard is not 
connected to this machine.

Turn off the main power of this 
machine, connect the compact 
keyboard to this machine. Wait 
at least 10 seconds, and then 
turn on the main power of this 
machine.

Indicates that data is being sent from the machine, regardless of the cur-
rent mode.

Indicates that the machine is receiving data, regardless of the current 
mode.

Indicates that an error occurred during an image stabilization operation, a 
print operation or a scan operation.
Press this icon to view a screen containing a warning code.

If the warning screen was closed when a warning occurred, press this but-
ton to display the warning screen again.

Appears when there is a message indicating that consumables must be re-
placed or the machine requires maintenance. Press this button to display 
the message, and then carry out the replacement or maintenance proce-
dure.

Appears when an error occurs with the connection to the POP server.

Indicates that paper is not loaded in the paper tray.

Indicates that very little paper remains in the paper tray.

If the optional image controller is installed, press this icon to display the 
setting screen for the image controller.