Cisco TRC5 CTS-RMT-TRC5= ユーザーズマニュアル
製品コード
CTS-RMT-TRC5=
18
Deployment Details
August 2012 Series
18
Step 3:
Create the rest of the subzones that your organization needs by
repeating Step 1 and Step 2.
Subzone membership rules are used to assign endpoints to the correct
subzones. The easiest way to match the endpoints is IP address subnet
ranges. Two membership rules are created for the HQ site to account for the
endpoints in the access subnet at 10.4.0.0/24 and Cisco MCU in the server
room subnet at 10.4.48.0/24.
subzones. The easiest way to match the endpoints is IP address subnet
ranges. Two membership rules are created for the HQ site to account for the
endpoints in the access subnet at 10.4.0.0/24 and Cisco MCU in the server
room subnet at 10.4.48.0/24.
The address range for the membership rules must correspond
with the specified site.
with the specified site.
Tech Tip
Step 4:
Navigate to
VCS configuration > Local Zone > Subzone member-
ship rules
, and then click
New.
Step 5:
On the
Create membership rule
page, enter the following values,
and then click
Create rule
:
• Rule name—
RL_HQ
• Description—
Subnet Rule for HQ
• Priority—
100
(default)
• Type—
Subnet
• Subnet address—
10.4.0.0
• Prefix length—
17
• Target subzone—
SZ_HQ
• State
—
Enabled
Step 6:
Create the rest of the membership rules for your organization by