Axis PS-A UK 12866 ユーザーズマニュアル
製品コード
12866
AXIS 540/640 User’s Guide
Setup for NetWare
11
NetWare Using NDPS over IPX
Installing the AXIS 540/640 as a Public Access printer:
1. Make sure that the HP NDPS Gateway is configured to automatically create a
public access printer.
2. Connect the AXIS 540/640 to the NetWare network, if it is not already
connected. Refer to Connecting the printer to the Network, on page 7 for more
information.
information.
3. Use the AXIS NetPilot to set the HP_JETADMIN parameter of the AXIS
540/640 to YES. The HP_JETADMIN parameter must be set to enable
communication between the AXIS 540/640 and the HP NDPS Gateway. Please
refer to Using AXIS NetPilot, on page 24.
communication between the AXIS 540/640 and the HP NDPS Gateway. Please
refer to Using AXIS NetPilot, on page 24.
Please refer to the appropriate Novell documentation for instructions on creating
NDPS Manager objects and the NDPS printers.
NDPS Manager objects and the NDPS printers.
Notes:
You can also set the HP_JETADMIN parameter of the AXIS 540/640 to YES via any standard web
browser. Please refer to Using any standard Web browser, on page 23.
browser. Please refer to Using any standard Web browser, on page 23.
The Public Access print servers are immediately available to everyone on the network.
The Axis Gateway will appear in NetWare 5.1 and later releases. To use the Axis Gateway with
earlier versions of NetWare, you can download the Axis Gateway Configuration utility from
www.axis.com.
earlier versions of NetWare, you can download the Axis Gateway Configuration utility from
www.axis.com.
To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using
IPX/SPX, Axis print server firmware 5.51 or later is needed.
IPX/SPX, Axis print server firmware 5.51 or later is needed.
Ne
tW
ar
e