Axis PS-A UK 12866 ユーザーズマニュアル

Setup for NetWare

AXIS 540/640 User’s Guide

 

12

 

Follow the instructions below to install the AXIS 540/640 in the NetWare Pure IP 
environment:

1. Start the Configuration Wizard from the User mode in the AXIS 540/640 Web 

interface. 

2. Click your way through the Wizard until reaching the NetWare page. Make sure 

that the PSERVER_NDS parameter is set. If you want to change the parameter 
value or if the parameter value is empty, enter the desired values. The parameter 
value must include the tree or the preferred file server you want to login to and 
the print server name including the context. 

3. Use NetWare Administrator to create the printer, print server and queue objects 

and to link them together in the NDS tree.

4. Use the Add Printer Wizard to install the printer on your client. Note that only 

NDS queue based PSERVER printing is supported. When installing, choose 
Network Printer and browse to the queue you have just created. Alternatively, 
choose Local Printer and select the queue you have just captured.

Any configuration and management of the AXIS 540/640 can be performed from any 
standard Web browser. Please refer to Using any standard Web browser, on page 23.

If the PSERVER_NDS parameter includes the name of a tree and not a specific file server, 
RCONAG6.NLM must be running on at least one file server in the specified tree.

If you have both IPX and IP enabled in your network, you can use AXIS NetPilot to install the AXIS 
540/640 and to connect print queues. See Queue-based NetWare Printing (IPX), on page 13.

Pure IP requires that you run NetWare 5 or higher.

Ne

tW

are