Raidon R2420-B3 プリント
RunneR Series
R2420-B3
R2420-B3
Easy Ejection 2.5”SSD/HDD RAID Enclosure
Tray-less Design
RAID Mode Switch
Energy Saving
USB3.0 Port
Embedding two 2.5” SSD/HDD with super speed USB3.0, R2420-B3 also offers RAID 1
(Mirroring), RAID 0 (Striping) and JBOD to provide high speed transferring rate to satisfy
multiple requirements from data sharing to data security.
RAID 0(Striping), Increase Storage Capacity
The performance of SSD is faster than HDD,
although the capacity is much smaller. Choosing
two individual SSD with RAID 0 can be regarded
as a large capacity of SSD, which enhance both
read and write performance.
RAID 1 (Mirroring), Ensure Data Safety
RAID 1 mode (mirroring) backup the identical
data among 2 drives to prevent data loss from
unexpectedly SSD failure.
JBOD, Share Data between Multiple SSD/HDD
R2420 is same as a general external enclosure
when choosing JBOD mode, but it may be
embedded two SSDs/HDDs or combined one
SSD and one HDD for exchanging data from
various hard drives.
Different test environments may present various performances.
Super Speed USB3.0 Host Interface
Performing a theoretical speed up to 5Gb/s,
USB3.0 is 10 times faster than USB2.0. While
using SSD, it fully increases efficiency of the
entire system.
Synchronise with PC for Energy Saving
Coming with a concept of reducing energy
consumption, R2420 and O.S. are synchronised
for green and cost saving.
Tray-less Design
A simple tray ejection design, R2420 can be
easily installed SSD or HDD without any screws.
RAID Mode Switch
Choosing three different RAID functions from the
RAID mode switch on the back panel, R2420 can
be configured in various requirements.