Raidon R2420-B3 Folheto

Página de 2
 
 
 
 
RunneR Series 
R2420-B3 
Easy Ejection 2.5”SSD/HDD RAID Enclosure 
 
 
 
 
 
 
 
 
Tray-less Design
 
 
 
 
RAID Mode Switch
 
Energy Saving 
USB3.0 Port 
 
Embedding two 2.5” SSD/HDD with super speed USB3.0, R2420-B3 also offers RAID 1 
(Mirroring), RAID 0 (Striping) and JBOD to provide high speed transferring rate to satisfy 
multiple requirements from data sharing to data security. 
 
 
 
 
 
 
 
 
 
RAID 0(Striping), Increase Storage Capacity 
The performance of SSD is faster than HDD, 
although the capacity is much smaller. Choosing 
two individual SSD with RAID 0 can be regarded 
as a large capacity of SSD, which enhance both 
read and write performance. 
 
RAID 1 (Mirroring), Ensure Data Safety 
RAID 1 mode (mirroring) backup the identical 
data among 2 drives to prevent data loss from 
unexpectedly SSD failure. 
 
JBOD, Share Data between Multiple SSD/HDD
R2420 is same as a general external enclosure 
when choosing JBOD mode, but it may be 
embedded two SSDs/HDDs or combined one 
SSD and one HDD for exchanging data from 
various hard drives.
 
Different test environments may present various performances.
Super Speed USB3.0 Host Interface 
Performing a theoretical speed up to 5Gb/s, 
USB3.0 is 10 times faster than USB2.0. While 
using SSD, it fully increases efficiency of the 
entire system. 
 
Synchronise with PC for Energy Saving 
Coming with a concept of reducing energy 
consumption, R2420 and O.S. are synchronised 
for green and cost saving. 
 
 
Tray-less Design 
A simple tray ejection design, R2420 can be 
easily installed SSD or HDD without any screws.
 
 
RAID Mode Switch 
Choosing three different RAID functions from the 
RAID mode switch on the back panel, R2420 can 
be configured in various requirements.