Pro-Ject RPM 10.1 Evolution 20983 プリント
製品コード
20983
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.10.2011
Pro-Ject RPM 10.1
Evolution
Evolution
Manual turntable with
10" tonearm and
equipment base
10" tonearm and
equipment base
Pro-Ject Ground it deluxe 3
Product information
Turntable
Chassis, motor housing and granulate filled equipment base Ground it deluxe piano-lacquered dark grey
The equipment base Ground it deluxe rests on four individually height-adjustable magnetic field feet.
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The medium density fibre plinth stands on three height-adjustable Sorbothane
®
-damped aluminium cones.
Granulate filled plinth guarantees constant damping. A supplied spirit level allows easy adjustment.
The motor is mounted in a separate metal housing to eliminate vibration transmission.
The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 5,4Kg
and a brass record puck.
and a brass record puck.
The magnet supported (amount of support adjustable), inverted bearing uses a stainless-steel axle carrying a
ceramic ball on which the ceramic bearing plate runs.
ceramic ball on which the ceramic bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw. A standard cable is provided.
the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 10cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
Sorbothane
®
-damped counterweight effectively counteracts unwanted resonances.
The counterweights supplied are suitable for cartridges weighing between 4 - 6g, 5 - 8g, 6 - 10g or 8 - 14g.
An alternative counterweight for cartridges weighing between 15 - 20g or 17 - 22g is available as an
accessory part.
An alternative counterweight for cartridges weighing between 15 - 20g or 17 - 22g is available as an
accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
phono sockets.
Dimensions turntable, W x H x D: Including motor unit 480 x 210 x 330mm.
Dimensions equipment base Ground it deluxe 3: 500 x 65 x 400mm
Dust cover Cover it optional, W x H x D: 525 x 290 x 425mm.
Dust cover Cover it optional, W x H x D: 525 x 290 x 425mm.
The manufacturer reserves the right to alter the technical specifications without notice.