Intel SR1640TH SR1640THNA ユーザーズマニュアル

Intel® Server System SR1640TH TPS 

Functional Architecture 

Revision 1.0 

 

 

51 

Intel order number: E94847-001 

 

Different mechanisms exist for resetting the system configuration to the default values. 
When a request to reset the system configuration is detected, the BIOS loads the default 
system configuration values during the next POST. You can send the request to reset the 
system to the defaults in the following ways: 

    Pressing <F9> from within the BIOS Setup utility. 
    Moving the clear system configuration jumper. 
    IPMI command (set System Boot options command) 
    Int15 AX=DA209  
    Choosing Load User Defaults from the Exit page of the BIOS Setup loads user set defaults 

instead of the BIOS factory defaults. 
 

The recommended steps to load the BIOS defaults are: 

1.  Power down the system (Do not remove AC power). 

2.  Move the Clear CMOS jumper from pins 1-2 to pins 2-3. 

3.  Move the Clear CMOS jumper from pins 2-3 to pins 1-2. 

4.  Power up the system. 

 

 

The following section provides detailed information regarding all connectors, headers, and 
jumpers on the server board. It lists all connector types available on the board and the 
corresponding reference designators printed on the silkscreen. 

Name 

Ref on MB 

Connector Type 

Pin Count 

RMM3 Lite-V internal header 

J1G1, J7E1 

Header 

8 

Front USB connector 

J7K1 

Connector 

24 

Front Panel header 

J8K1 

Header 

34 

SAS 4i connector 

J9J2 

Connector 

32 

IPMB header 

J6K1 

header 

4 

System Power connector 

J9H1 

connector 

44 

Board Identity LED connector 

J3B1 

connector 

3 

FAN connector 

J4K1, J6K2, J4K2 

connector 

8 

Power connector to HDD 

J7K2 

connector 

6