Intel SR1640TH SR1640THNA ユーザーズマニュアル
製品コード
SR1640THNA
Intel® Server System SR1640TH TPS
Functional Architecture
Revision 1.0
53
Intel order number: E94847-001
2.7.1.1
Power Connectors
The main power supply connection uses a special designed connector (J9H1) to provide
power to both nodes on the same board.
power to both nodes on the same board.
Figure 33. Connector Pin-out
Table 37. Power connector pin-out (J9H1)
Signal
Description
Signal
Description
12VLS
+12V load share bus
PWOK
Power OK output
5 VSB
5V standby output
+12 VRS
12V remote sense
PSON#
Power enable input
PS-
KILL#/A1
Supply fast shutdown/I2C
address bit1
B/P FAIL
B/P fail input
SCL
I2C clock signal
A0
I2C address bit 0
SDA
I2C data signal
+15VCC B/P
VCC
2.7.1.2
System Management Headers
2.7.1.2.1
Intel
®
Remote Management Module 3 Lite-V (Intel
®
RMM3 Lite-V)
Connector
A 8-pin Intel
®
RMM 3 Lite-V connector is included for every node on the server board
S3420TH to support the optional Intel
®
Remote Management Module 3 Lite-V. This server
board does not support third-party management card.
Note: This connector is not compatible with the Intel
®
Remote Management Module 3 (Intel
®
RMM3), or Intel
®
Remote Management Module 3 Lite (Intel
®
RMM3 Lite).
Table 38. RMM3 Lite-V Internal header pin-out (J1G1, J7E1)
Pin #
Signal
Pin #
Signal
1 Key 5 GND
2 SPI_IBMC_BK_CS_N 6 SPI_IBMC_BK_CLK
3 P3V3_AUX 7
2 SPI_IBMC_BK_CS_N 6 SPI_IBMC_BK_CLK
3 P3V3_AUX 7
FM_RMM3_PRESENT_N
4 SPI_IBMC_BK_DO 8 SPI_IBMC_BK_DI
2.7.1.2.2
IPMB Header
Table 39. IPMB header pin-out (J6K1)
Pin #
Signal
Pin #
Signal
1
SMB_IPMB_5VSB_DAT_node1
3
SMB_IPMB_5VSB_CLK_node1
2
SMB_IPMB_5VSB_DAT_node2
4
SMB_IPMB_5VSB_CLK_node2