Chauvin Arnoux P01157020 Simple Logger P01157020 ユーザーズマニュアル
製品コード
P01157020
SIMPLE LOGGER II
English
Page 53
MODEL
ML912
Electrical
Channels
Two
Input
Captive MiniFlex
®
AC Current Flexible Sensors
Range
0.5 to 100 A
AC
5 to 1,000 A
AC
Accuracy
(50/60Hz)
(50/60Hz)
0 to 1 A unspecified
1 to 100 A:
0 to 5 A unspecified
5 to 1,000 A:
±(1% of Reading + 0.5 A)
±(1% of Reading + 1 A)
Resolution
0.1 A
Sample Rate
64 samples/cycle
Storage Rate
Programmable from 125 ms to 1 day
Storage Modes
Start/Stop, FIFO and Extended Recording Mode* (XRM™)
Recording Length
15 minutes to 8 weeks, programmable using DataView
®
Memory
240,000 measurements (512 KB).
Recorded data is stored in non-volatile memory and retained
even if battery is low or removed.
Communication
USB 2.0 optically isolated
Power Source**
2 x 1.5 V AA-cell alkaline batteries
Battery Life
100 hours to > 45 days (dependent on storage rate/recording length)
Mechanical
Dimensions
4.95 x 2.75 x 1.28" (136 x 70 x 32 mm) w/o Sensor
Weight (with battery)
8.67 oz (245 g)
Sensor/Cable Length
Sensor: 6" (152 mm) / Cable: 6 ft (2 m)
Case
UL94-V0
Vibration
IEC 68-2-6 (1.5 mm, 10 to 55 Hz)
Shock
IEC 68-2-27 (30 G)
Drop
IEC 68-2-32 (1 m)
Environmental
Operating Temperature
14° to 122°F (-10° to 50°C)
Storage Temperature
-4° to 140°F (-20° to 60°C)
Relative Humidity
Up to 85% at 95°F (35°C), Non-condensing
Altitude
2000 m
Safety & Electro-magnetic compatibility
Safety Rating
EN 61010-1; 600 V CAT IV; Pollution Degree 2
Protection Degree
IP40
Electro-Magnetic Compatibility
EN 61326-1
CE Approved
Yes
*This specific recording mode has the advantage letting recording continue for a long period, but at the
expense of the data storage rate. Each time the memory becomes full, in the XRM
TM
mode, every other item
of data already recorded is erased, making room for new data. The rate of recording of the new data is
slowed accordingly. This process continues until recording is deliberately stopped.
**A backup capacitor maintains the date and time for more than 10 seconds to allow completely transparent
replacement of the batteries. Beyond 10 seconds, the date and time information must be reset (the
configuration and data are not affected). If the device remains linked to DataView
slowed accordingly. This process continues until recording is deliberately stopped.
**A backup capacitor maintains the date and time for more than 10 seconds to allow completely transparent
replacement of the batteries. Beyond 10 seconds, the date and time information must be reset (the
configuration and data are not affected). If the device remains linked to DataView
®
via a desktop computer,
the battery life will be 100 hours whatever the recording rate chosen.
*** Input levels exceeding this limit may damage the device.
*** Input levels exceeding this limit may damage the device.