Sangean DPR-99+ DPR99 データシート

9

As time passes new stations may become available. To find new

stations proceed as follows:-

1. Press and release the Auto Tune button, the display will show

    “Fast scanning”. Your radio will perform a scan of the DAB III

    frequencies. As new stations are found the station counter on the

    right-hand side of the display will increase and stations will be added

    to the list.

2. To carry out a full scan of the entire DAB Band III frequencies press

    and hold down the Auto Tune button for more than 2 seconds and

    then release. The display will show “Full scanning”. As new stations

    are found the station counter on the right-hand side of the display will

    increase and stations will be added to the list.

1. Repeatedly press and release the Info button until the display shows

    the signal strength.

2. Position your radio and carefully angle the telescopic aerial for best

    reception using the signal strength display as a guide. Move your

    radio around and position it so as to give maximum number of black

    rectangles on the signal strength display. The clear unfilled rectangle

    indicates the minimum signal level required for satisfactory reception.

3. Press the Info button to exit the signal strength display.