Sangean DPR-99+ DPR99 データシート

10

Manual tuning allows you to tune directly to the various DAB Band III

channels.

1. Press and hold the Select button until the display shows

    “Manual tune”. Release the Select button.

2. Press either of the Tuning Up or Down buttons to select the required

    DAB channel.

3. Press and release the Select button to select the required

    DAB channel. The open bar in the middle shows you the minimum

    signal strength needed for good DAB reception. The signal strength

    bars will go up and down showing the changing signal strength as

    you adjust the telescopic aerial on your radio.

4. When a DAB signal is found, the display will show the name of the

    DAB multiplex. Any new radio stations found will be added to the list

    stored in the radio.

5. Press and release the Select button to return to normal tuning.

As an alternative to pressing the Select button to select a station your

radio can be set so as to automatically select a station.

1. Press and release either of the Tuning Up or Down buttons a

    few times, immediately press and hold down the Select button until

    the display shows “Autoselect ON”.

2. Press the Tuning Up or Down buttons until the station you require is

    visible on the display. After a few seconds your radio will

    automatically select the station shown on the display.

3. To switch off autoselect press and release the Tuning Up or Down

    buttons a few times, immediately press and hold down the Select

    button until the display shows “Autoselect Off”.