Sangean DCR-10 DCR10SW データシート

12

1. If your radio is in standby mode, press the Standby/Sleep button
    to switch it on.

2. Press and release the Source button to select DAB+ mode.
    The display will show “TUNING” for a few seconds.

3. If this is the first time the radio is used a quick scan of the
    DAB+ channels may be carried out (depending on whether
    scanning was already completed in standby mode.) If the radio
    has been used before, the last used station will be selected.

4. When first switched on, the first station in the list of stations will
    be shown. Press the Select button to tune to this station or
    rotate the Tuning control to select an alternative station.
    The display will show the station name on the lower line of the
    text display.

5. If the stations list is still empty after the scan operation or if the
    selected station cannot be received your radio will display
    “OFF AIR”.

6. If no signals are found it may be necessary to relocate your
    radio to a position giving better reception.

Note that radio station name and frequency displays shown in this
user guide may differ from those that you see on your radio.
Broadcasters may change radio station names that are transmitted,
and the frequencies used for DAB+ and FM radio stations may not
be the same in all parts of the country.

2