Omron G2R-2-SNI 24 VAC PCB Mount Relay 24Vac 2 CO, DPDT G2R-2-SNI 24 VAC データシート
製品コード
G2R-2-SNI 24 VAC
19
G2R
G2R
Precautions
■
Mounting
When mounting a number of relays on a PCB, be sure to provide
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
The above minimum mounting space is necessary due to mutual
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
5 mm min.
5 mm min.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K013-E1-11B