Futaba 6J F4103 データシート
製品コード
F4103
65
To activate trainer function:
1) Turn the transmitter on.
2) Press and hold the MODE button to access the programming mode.
3) Press either the MODE key OR the END key to scroll through the function menus.
Continue pressing the MODE or END key until the trainer (TRNR) menu appears on
screen.
screen.
~; #
+} [~ = [
screen. Press and hold the DATA INPUT lever upward for approximately two (2)
;; '##+ + >[
audible beep.
;; '##+ + >[
audible beep.
5) Follow the procedure below to program the desired trainer mode selection for the T6J.
Trainer mode selection:
As noted previously, there are several trainer modes available in the T6J. The methodology utilized will vary
'### ! ! +# '## # $
offer three different modes; Channels 5 and 6 offer two. Each channel may be individually assigned using
one of the trainer modes. The trainer modes are as follows:
'### ! ! +# '## # $
offer three different modes; Channels 5 and 6 offer two. Each channel may be individually assigned using
one of the trainer modes. The trainer modes are as follows:
[ #}[>~; # ##+
# ;[ #
offered on all six (6) channels of the T6J.
offered on all six (6) channels of the T6J.
? }?[~ K ; # ## +
#
[ # !#
# ; '##!
might otherwise arise with varying control inputs. The Function mode is only offered
on Channels 1-4 of the T6J.
[ # !#
# ; '##!
might otherwise arise with varying control inputs. The Function mode is only offered
on Channels 1-4 of the T6J.
>}>??~; '##! ! ! # ;>
offered on all six (6) channels of the T6J.
offered on all six (6) channels of the T6J.
1) With the trainer function active, press the SELECT button to choose the desired channel.
2) Press the DATA INPUT lever either upward or downward to select amongst the available trainer modes for
the previously selected channel.
the previously selected channel.
3) Repeat this for all other channels as desired.