Cypress Semiconductor CY3280-MBR3 データシート
CY8CMBR3002, CY8CMBR3102
CY8CMBR3106S, CY8CMBR3108
CY8CMBR3110, CY8CMBR3116 Datasheet
Document Number: 001-85330 Rev. *G
Page 12 of 37
Device Feature Details
Automatic Threshold
■
Dynamically sets all threshold parameters for button sensors,
depending on the noise in the environment.
■
Applicable only to button sensors.
■
Mutually exclusive from the EMC feature. If EMC is enabled,
automatic threshold is automatically disabled.
Sensitivity Control
This feature allows specification of the minimum change in
sensor capacitance that can trigger a sensor state change (OFF
to ON or vice-versa).
■
Sensitivity can be specified individually for each CapSense
button and slider.
■
Sensitivity can be specified as one of the four available values:
0.1 pF, 0.2 pF, 0.3 pF, and 0.4 pF.
■
Higher sensitivity values can be used for thick overlays or small
button diameters.
■
Lower sensitivity values should be used for large buttons or
thin overlays to minimize power consumption.
Sensor Auto Reset
This feature resets the CapSense sensors to the OFF state after
a specific time period, even though they continue to be activated.
■
Resets the sensor baseline to the current raw count after a
specific time period, even though the sensors continue to be
activated.
■
Prevents a stuck sensor when a metal object is placed close
to that sensor.
■
The Auto Reset period can be set to 5 or 20 seconds and can
be configured through two global settings provided in the
❐
Global setting for all proximity sensors
❐
Global setting for all CapSense buttons and slider segments
■
The guard sensor does not undergo Auto Reset.
Figure 2. Example of Button Auto Reset on GPO0 (DC Active
Low Output)
Table 7. Device Feature Benefits
Feature
Benefits
Automatic Threshold
Automatically tunes all the threshold
parameters of the sensors for
different noise settings
parameters of the sensors for
different noise settings
Sensitivity Control
Maintains optimal button
performance for different overlay
and noise conditions
performance for different overlay
and noise conditions
Sensor Auto Reset
Recalibrates the sensor when a
stuck-sensor (fault) condition
occurs, and avoids invalid sensor
output status to host
stuck-sensor (fault) condition
occurs, and avoids invalid sensor
output status to host
Noise Immunity
Provides immunity against external
noise and the ability to detect
touches without false trigger in noisy
environments
noise and the ability to detect
touches without false trigger in noisy
environments
Flanking Sensor
Suppression (FSS)
Suppression (FSS)
Avoids multiple button triggers in a
design with closely spaced buttons
design with closely spaced buttons
Host Controlled GPOs
GPO pins, which can be controlled
by the host processor through I
by the host processor through I
2
C
LED On time
GPO output status stays ON for a
set duration after the touch is
released to provide better visual
feedback to the user
set duration after the touch is
released to provide better visual
feedback to the user
Toggle
Sensor output status toggles on
every sensor activation to mimic the
mechanical toggle button
functionality
every sensor activation to mimic the
mechanical toggle button
functionality
Buzzer Signal Output
Provides audio feedback on button
touch
touch
Host Interrupt
Provides interrupt to host when
there is a change in sensor status
there is a change in sensor status
Latch Status Output
Latches the sensor status changes
in the register until the host reads
the activated sensor status; this
ensures that the sensor status is
always read by the host even if the
host is late to service the host
interrupt signal from CY8CMBR3xxx
in the register until the host reads
the activated sensor status; this
ensures that the sensor status is
always read by the host even if the
host is late to service the host
interrupt signal from CY8CMBR3xxx
Analog Voltage Output
Indicates the button status through
voltage levels
voltage levels
System Diagnostics
Supports production testing and
debugging
debugging
Low-Power Sleep Mode
and Deep Sleep Mode
and Deep Sleep Mode
Reduces power consumption
CSx
GPOx
Auto Reset Period
GPOx turns inactive as Auto
Reset period expired for CSx
Sensor
Activated
Touch on Sensor