Microchip Technology MA240029 データシート
2010-2011 Microchip Technology Inc.
DS39996F-page 29
PIC24FJ128GA310 FAMILY
2.0
GUIDELINES FOR GETTING
STARTED WITH 16-BIT
MICROCONTROLLERS
STARTED WITH 16-BIT
MICROCONTROLLERS
2.1
Basic Connection Requirements
Getting started with the PIC24FJ128GA310 family
family of 16-bit microcontrollers requires attention to a
minimal set of device pin connections before
proceeding with development.
The following pins must always be connected:
• All V
family of 16-bit microcontrollers requires attention to a
minimal set of device pin connections before
proceeding with development.
The following pins must always be connected:
• All V
DD
and V
SS
pins
(see
)
• All AV
DD
and AV
SS
pins, regardless of whether or
not the analog device features are used
(see
(see
)
• MCLR pin
(see
• V
CAP
pin
(see
)
These pins must also be connected if they are being
used in the end application:
• PGECx/PGEDx pins used for In-Circuit Serial
used in the end application:
• PGECx/PGEDx pins used for In-Circuit Serial
Programming™ (ICSP™) and debugging purposes
(see
(see
)
• OSCI and OSCO pins when an external oscillator
source is used
(see
(see
)
Additionally, the following pins may be required:
• V
• V
REF
+/V
REF
- pins used when external voltage
reference for analog modules is implemented
The minimum mandatory connections are shown in
.
FIGURE 2-1:
RECOMMENDED
MINIMUM CONNECTIONS
MINIMUM CONNECTIONS
Note:
The AV
DD
and AV
SS
pins must always be
connected, regardless of whether any of
the analog modules are being used.
the analog modules are being used.
PIC24FJXXXX
V
DD
V
SS
V
DD
V
SS
V
SS
V
DD
AV
DD
AV
SS
V
DD
V
SS
C1
R1
V
DD
MCLR
V
CAP
R2
C7
C2
(2)
C3
(2)
C4
(2)
C5
(2)
C6
(2)
Key (all values are recommendations):
C1 through C6: 0.1
F, 20V ceramic
C7: 10
F, 6.3V or greater, tantalum or ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
R2: 100Ω to 470Ω
Note
1:
for details on selecting the proper
capacitor for Vcap.
2:
The example shown is for a PIC24F device
with five V
with five V
DD
/V
SS
and AV
DD
/AV
SS
pairs.
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
adjust the number of decoupling capacitors
appropriately.
(1)