Ea Elektro Automatik EA Elektro-Automatik EA-ELR 9250-140 3U Electronic Load 0 - 140 A 0 - 250 Vdc 0 - 7000 W 33200406 データシート
製品コード
33200406
Page 21
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
ELR 9000 Series
1.9.3 Scope of delivery
1 x Electronic load device
1 x Printed operating manual
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m USB cable
1 x Set of DC terminal cover(s)
1 x CD “Drivers & Tools“
1 x AC connector plug (clamp type)
1 x Set for strain relief
1 x Printed operating manual
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m USB cable
1 x Set of DC terminal cover(s)
1 x CD “Drivers & Tools“
1 x AC connector plug (clamp type)
1 x Set for strain relief
1.9.4 Accessories
For these devices the following accessories are available:
Digital interface modules
IF-AB
IF-AB
Pluggable and retrofittable AnyBus interface modules for RS232, CANopen,
Ethernet, Profibus, ProfiNet, ModBus or Devicenet are available. Others upon
request. Details about the interface modules and the programming of the device
using those interfaces can be found in separate documentation. It is usually
available on the CD, which is included with the device, or as PDF download on
the Elektro-Automatik website.
Automatic Isolation Unit
ENS2
ENS2
External automatic isolation unit (AIU, former german term: ENS) with contactors
(for one ELR 9000 up to 10.5 kW) resp. without contactors (bigger system where
contactors are installed by the user), which might be required to be installed for
the operation of an energy recovering device which is connected to a public grid.
This option can be purchased separately and retrofitted by the user on location.
1.9.5 Options
These options are not retrofittable as they are permanently built in or preconfigured during the manufacturing process.
CABINET
19“-rack
19“-rack
Racks in various configurations up to 42U as parallel systems are available, or
mixed with power supply devices to create test systems. Further information in
our catalogue or upon request
3W
GPIB interface
GPIB interface
Replaces the standard slot for pluggable interface modules by a rigidly installed
GPIB port. This option can be retrofitted upon request. The device will keep the
USB and analog interfaces. Via the GPIB port, it can only support SCPI commands.