Kuebler Kübler CODIX 529 Process display Codix 529 Assembly dimensions 45 x 22 mm 6.529.012.300 データシート
製品コード
6.529.012.300
9
english
english
3. Setting of the parameters
3.1 Selecting the displayed value
By pressing the right key, the display can
be switched between the current, min., or
max. value.
be switched between the current, min., or
max. value.
Pressing the right key once the current
function („Act“, „Min“ or „Max“) is displayed
for 2 seconds. If within this period the right
key is pressed again, the current function
is changed. The display shows the new
current function for two seconds.
Afterwards the corresponding value is dis-
played. If „Min“ or „Max“ is the current
function, the value can be resetted by
pressing the left key. If neither storing of
min. nor max. value is activated in set up,
both keys are out of function.
function („Act“, „Min“ or „Max“) is displayed
for 2 seconds. If within this period the right
key is pressed again, the current function
is changed. The display shows the new
current function for two seconds.
Afterwards the corresponding value is dis-
played. If „Min“ or „Max“ is the current
function, the value can be resetted by
pressing the left key. If neither storing of
min. nor max. value is activated in set up,
both keys are out of function.
3. 2 Setting the operating parameters
a. Hold down both keys on front panel and switch
on the supply voltage.
b. The display shows
c. After releasing the keys the display alternates
c. After releasing the keys the display alternates
between menu title and corresponding menu
item at a frequency of 0.5 Hz. After any key is
pressed, only the menu item is displayed.
item at a frequency of 0.5 Hz. After any key is
pressed, only the menu item is displayed.
d. Pressing the right key,
the menu item will be
the menu item will be
switched to next value.
e. Hold down the left key and press the right key
to switch to the next menu title.
f. After programming the last menu item, the pro-
gramming routine will be left and the new val-
ues will be stored by switching the menu item
to „YES“. If you chose „NO“, the programming
routine will be passed through once again.
ues will be stored by switching the menu item
to „YES“. If you chose „NO“, the programming
routine will be passed through once again.
4. Programming routine
Programmable parameters are shown in
succession. After one pass, the device is
fully programmed.
In each case the first shown item is the
factory preset.
succession. After one pass, the device is
fully programmed.
In each case the first shown item is the
factory preset.
4.1 Range of input signal
0..20 mA
4..20 mA
0..10 V
2..10 V
4.2 Max. value display
Max. value can be display-
ed
ed
Max. value wont be dis-
played, next menu title is
skipped
played, next menu title is
skipped
4.3 Max. value reset
Max. value can be reset by
pressing left button. (Cur-
rent value becomes new
max. value)
pressing left button. (Cur-
rent value becomes new
max. value)
Max. value can’t be reset.
4.4 Min. value display
Min. value can be displayed
Min. value wont be displayed,
next menu title is skipped
next menu title is skipped