Ciclosport Navic 50 GPS Cycle Computer With Data Logger 10520050 データシート
製品コード
10520050
3
Congratulations !
By purchasing the CicloNAVIC 50 you have acquired high-level GPS-datalogger with
electronic compass and navigation function.
1. General informations
The CicloNAVIC 50 is equipped with a GPS receiver and is so able to calculate and record
distance and speed. With the program CicloGuide the recorded tours can be displayed on
the PC.
Additionally the CicloNAVIC 50 offers the possibility to reconstruct a tour (with a maximum of
50 waypoints) which was created on the PC. The directional sign in the display is shown by
arrows.
For this the the reception of GPS-satellite signals is required. During the first use it can last a
bit, to receive the first GPS-signals.
The reception of the GPS-signal is shown by vertical bars beside the battery symbol in the
upper part of the display.
Attention: whoever carries out sport should have a general medical check up on his/her
general state of health – especially beginners, persons older than 35 years of age and
anyone who has suffered from illnesses or injuries in the past. It is recommended that a
doctor be consulted in any case in the presence of risk factors, such as smoking, high blood
pressure, high cholesterol values, diabetes, lack of exercise and excess weight.
2. Operational setup
2.1 Charging
To charge the CicloNAVIC 50 remove the rubber plug on the backside of the CicloNAVIC
50. Connect the mini-USB-plug of the USB-cable with the CicloNAVIC 50 and the USB-plug
with a USB-port on your PC.
Charging time is about 2,5 hours.
During the charging a corresponding symbol is shown in upper left display.
After the charging remove mini-USB-plug and close rubber plug.
50. Connect the mini-USB-plug of the USB-cable with the CicloNAVIC 50 and the USB-plug
with a USB-port on your PC.
Charging time is about 2,5 hours.
During the charging a corresponding symbol is shown in upper left display.
After the charging remove mini-USB-plug and close rubber plug.
2.2 Installing the handlebar bracket
The handlebar bracket can be mounted on the handlebar
(pict. A-1) or on the stem (Abb. A-2).