4d Systems 7.0” LCD CAPE for beaglebone black 4DCAPE-70T 4DCAPE-70T データシート
製品コード
4DCAPE-70T
4D SYSTEMS 4D 7.0” LCD CAPE – BEAGLE BONE BLACK
© 2014 4D SYSTEMS Page 3 of 11 www.4dsystems.com.au
1. Description
The 4D 7.0” LCD CAPE is a cape specifically designed
for the Beagle Bone Black (BBB), and provides a 7.0”
primary display for the BBB for direct user
interaction and information display, along with the
ability for additional CAPES to be attached at the
same time.
The 4DCAPE-70T is
not
compatible with the
previous Beagle Bone (Beagle Bone White), and can
only be used with the Beagle Bone Black.
The 4D 7.0” LCD CAPE features a 7.0” TFT LCD
800x480 resolution display with Resistive Touch.
The 4DCAPE-70T utilises the drivers developed for
the CircuitCo LCD7 00A3, however provides a
different form factor and pricing point to the LCD7.
The Beagle Bone Black connects directly to the back
of the 4DCAPE-70T, and provides everything the
CAPE requires such as power and display signals.
Another CAPE can be added to the secondary
connectors on the back of the 4DCAPE-70T if
required.
The 4D 7.0” LCD CAPE features 7 push buttons
below the screen, LEFT, RIGHT, UP, DOWN, ENTER,
RESET and POWER, along with 2 LED’s to indicate
Power and User Status (normally heartbeat).
Mounting of the 4DCAPE-7.0T is achieved with the
4x 3.5mm mounting holes present on the CAPE,
enabling standard M3 or #6-32 screws to fasten the
4DCAPE-7.0 as required.
only be used with the Beagle Bone Black.
The 4D 7.0” LCD CAPE features a 7.0” TFT LCD
800x480 resolution display with Resistive Touch.
The 4DCAPE-70T utilises the drivers developed for
the CircuitCo LCD7 00A3, however provides a
different form factor and pricing point to the LCD7.
The Beagle Bone Black connects directly to the back
of the 4DCAPE-70T, and provides everything the
CAPE requires such as power and display signals.
Another CAPE can be added to the secondary
connectors on the back of the 4DCAPE-70T if
required.
The 4D 7.0” LCD CAPE features 7 push buttons
below the screen, LEFT, RIGHT, UP, DOWN, ENTER,
RESET and POWER, along with 2 LED’s to indicate
Power and User Status (normally heartbeat).
Mounting of the 4DCAPE-7.0T is achieved with the
4x 3.5mm mounting holes present on the CAPE,
enabling standard M3 or #6-32 screws to fasten the
4DCAPE-7.0 as required.
2. Features
• 7.0” TFT LCD CAPE for the Beagle Bone Black
• Available only with Resistive Touch (4DCAPE-
70T)
• 7 push buttons including LEFT, RIGHT, UP, DOWN,
ENTER, RESET and POWER
• 2 LED Lights for Power and User
• 2x2 Jumper with shunts for EEPROM CAPE ID
selection
• Module dimensions: 179.9 x 114.9 x 19.5mm
• Module dimensions with Beagle Bone Black
connected: Approx 179.9 x 114.9 x 19.5mm
• 4x 3.5mm Mounting holes
• RoHS and CE Compliant.
Used pins for 4DCAPE-70T (Header’s P1)