Atmel Evaluation Kit AT91SAM9M10-G45-EK AT91SAM9M10-G45-EK データシート

製品コード
AT91SAM9M10-G45-EK
ページ / 55
45
SAM9M10 [SUMMARY]
6355ES–ATARM–12-Mar-13
 
z
RS485 with driver control signal
z
ISO7816, T = 0 or T = 1 Protocols for interfacing with smart cards
z
NACK handling, error counter with repetition and iteration limit
z
IrDA modulation and demodulation
z
Communication at up to 115.2 Kbps
z
Test Modes
z
Remote Loopback, Local Loopback, Automatic Echo
10.4
Serial Synchronous Controller (SSC)
z
Provides serial synchronous communication links used in audio and telecom applications (with CODECs in Master 
or Slave Modes, I
2
S, TDM Buses, Magnetic Card Reader,...)
z
Contains an independent receiver and transmitter and a common clock divider
z
Offers a configurable frame sync and data length
z
Receiver and transmitter can be programmed to start automatically or on detection of different event on the frame 
sync signal
z
Receiver and transmitter include a data signal, a clock signal and a frame synchronization signal
10.5
AC97 Controller
z
Compatible with AC97 Component Specification V2.2
z
Capable to Interface with a Single Analog Front end
z
Three independent RX Channels and three independent TX Channels
z
One RX and one TX channel dedicated to the AC97 Analog Front end control 
z
One RX and one TX channel for data transfers, associated with a PDC
z
One RX and one TX channel for data transfers with no PDC
z
Time Slot Assigner allowing to assign up to 12 time slots to a channel
z
Channels support mono or stereo up to 20 bit sample length
z
Variable sampling rate AC97 Codec Interface (48KHz and below)
10.6
Timer Counter (TC)
z
Three 16-bit Timer Counter Channels
z
Wide range of functions including:
z
Frequency Measurement
z
Event Counting
z
Interval Measurement
z
Pulse Generation
z
Delay Timing
z
Pulse Width Modulation
z
Up/down Capabilities
z
Each channel is user-configurable and contains:
z
Three external clock inputs
z
Five internal clock inputs
z
Two multi-purpose input/output signals
z
Two global registers that act on all three TC Channels