Mikroelektronika MIKROE-724 データシート

mikroBasic PRO for dsPIC30/33 and PIC24

MikroElektronika

353

Glcd_Set_Side

Glcd_Set_X

Glcd_Set_Page

sub procedure Glcd_Set_Side(dim x_pos as byte)

Description Selects Glcd side. Refer to the Glcd datasheet for detailed explanation. 
Parameters - 

x_pos

: Specifies position on x-axis of the Glcd. Valid values: 0..127. Values from 0 to 63 specify the 

left side, values from 64 to 127 specify the right side of the Glcd. 

Nothing.

Glcd needs to be initialized, see Glcd_Init routine.

The following two lines are equivalent, and both of them select the left side of Glcd:

Glcd_Select_Side(0)

Glcd_Select_Side(10)

For side, x axis and page layout explanation see schematic at the bottom of this page.

sub procedure Glcd_Set_X(dim x_pos as byte)

Description Sets x-axis position to 

x_pos

 dots from the left border of Glcd within the selected side.

Parameters - 

x_pos

: position on x-axis. Valid values: 0..63 

Nothing.

Glcd needs to be initialized, see Glcd_Init routine.

Glcd_Set_X(25)

For side, x axis and page layout explanation see schematic at the bottom of this page.

sub procedure Glcd_Set_Page(dim page as byte)

Description Selects page of the Glcd.
Parameters - 

page

: page number. Valid values: 0..7 

Nothing.

Glcd needs to be initialized, see Glcd_Init routine.

Glcd_Set_Page(5)

For side, x axis and page layout explanation see schematic at the bottom of this page.