Mikroelektronika MIKROE-724 データシート
mikroBasic PRO for dsPIC30/33 and PIC24
MikroElektronika
355
Glcd_Fill
Glcd_Dot
Glcd_Line
Prototype
sub procedure Glcd_Fill(dim pattern as byte)
Description Fills Glcd memory with the byte pattern.
To clear the Glcd screen, use
Glcd_Fill(0)
.
To fill the screen completely, use
Glcd_Fill(0xFF)
.
Parameters -
pattern
: byte to fill Glcd memory with.
Returns
Nothing.
Requires
Glcd needs to be initialized, see Glcd_Init routine.
Example
Glcd_Fill(0) ‘ Clear screen
Notes
None.
Prototype
sub procedure Glcd_Dot(dim x_pos, y_pos, color as byte)
Description Draws a dot on Glcd at coordinates (
x_pos, y_pos
).
Parameters -
x_pos
: x position. Valid values: 0..127
-
y_pos
: y position. Valid values: 0..63
-
color
: color parameter. Valid values: 0..2
The parameter
color
determines a dot state: 0 clears dot, 1 puts a dot, and 2 inverts dot state.
Returns
Nothing.
Requires
Glcd needs to be initialized, see Glcd_Init routine.
Example
‘ Invert the dot in the upper left corner
Glcd_Dot(0, 0, 2)
Notes
For x and y axis layout explanation see schematic at the bottom of this page.
Prototype
sub procedure Glcd_Line(dim x_start, y_start, x_end, y_end as integer, dim
color as byte)
Description Draws a line on Glcd.
Parameters -
Parameters -
x_start
: x coordinate of the line start. Valid values: 0..127
-
y_start
: y coordinate of the line start. Valid values: 0..63
-
x_end
: x coordinate of the line end. Valid values: 0..127
-
y_end
: y coordinate of the line end. Valid values: 0..63
-
color
: color parameter. Valid values: 0..2
The parameter
color
determines the line color: 0 white, 1 black, and 2 inverts each dot.
Returns
Nothing.
Requires
Glcd needs to be initialized, see Glcd_Init routine.
Example
‘ Draw a line between dots (0,0) and (20,30)
Glcd_Line(0, 0, 20, 30, 1)
Notes
None.