Reely ARF 1095 mm 208918 データシート

• The rechargeable batteries required for operation (e.g. remote control transmitters, receivers, flight battery) must be

charged according to the manufacturer’s specifications.

• If batteries are used as a transmitter power supply, make sure that they have sufficient remaining capacity (battery

checker). If the batteries are empty, always replace the complete set, never individual cells only.

• Before operation, always control the settings of the trim slider on the transmitter for the various steering directions

and, if necessary, adjust them.

• Always switch on the transmitter first. Only then can the receiver system in the model be taken into operation.

Otherwise, there may be unforeseeable reactions and, e.g., the electric model’s propeller may start up unintentionally.

• Always check if the rotor is correctly and securely installed before operating the product.

• Regularly example the propeller for damage. Damaged propellers pose a danger and must no longer be taken into

operation.

• Make sure that no objects or body parts are in the range or the suction area of the rotor while it is rotating.

• Do not take any risks when operating the product! Your own safety and that of your environment is solely down to

you being responsible when dealing with the model.

• Improper operation may cause serious injury and property damage! Therefore make sure to keep a sufficiently safe

distance to persons, animals or objects during operation.

• Select a suitable area to operate your model plane.

• Fly your model only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can

cause incorrect responses.

• Do not direct your model towards spectators or towards yourself.

• Never point the aerial of the transmitter directly onto the model. This significantly impairs signal transmission to the

model.

• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the flight

battery first or switch off the receiver system in the model. It is only after this that the remote control may be turned
off.

• In case of a defect or a malfunction, remove the problem before using the model again.

• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.