Reely remote control Electric Glider Sky Hawk RtF 1200 mm 3389 / 408C1 データシート

• The fin (1) is slid from above into the unit holder and

aligned.

• The rear edge of the fin dampener must be flush with

the rear edge of the elevator unit damping surface (see
broken line).

• Once the fin is exactly aligned, attach it from the left

side with the two 2 x 10 mm screws (2).

• You have to take off the cabin hood (1) to insert the

flight accumulator. To do so, press the latch (2) forward
and lift the hood off forward on the rear.

• The hood is maintained in place in the front by another

latch that snaps in beneath the fuselage wall. When
putting on the hood, you first have to slide in the catch
beneath the side wall of the fuselage before securing
the hood again with the front latch.

• Prior to connecting the accumulator to the model, you

have to check whether the function switch on the model
(3) is in the rear position (OFF).

• Insert the charged flight battery (4) into the battery

compartment and connect it with the plug-type
connection (5) of the flight control.

• Once again, the latches of the flight control plug must

engage in the groove of the accumulator plug the same
way as with connection to the charger.