Reely RtF 505 mm Mini J3 データシート

製品コード
Mini J3
ページ / 120
36
• Before commissioning, check the trim button settings for direction control and adjust them if required.
• Always check if the rotor is correctly and securely installed before operating the product.
• Make sure that no objects, clothes or body parts are in the range or the suction area of the rotor while it is rotating.
c) During Operation
• Do not take any risks when operating the product! Your own safety and that of your environment is solely down to
you being responsible when dealing with the model.
• Improper operation may cause serious injury and property damage! Therefore make sure to keep a sufficiently safe
distance to persons, animals or objects during operation.
• Select a suitable room or suitable flight area to operate your model. We recommend a warehouse or gym for your
first flight attempts. Once you have your model well under control, you can fly it in smaller rooms as well. If you use
the model in the outdoor area, choose a windstill or low-wind day.
• Fly your model only if your ability to respond is unrestricted. The influence of tiredness, alcohol or medication can
cause incorrect responses.
• Do not direct your model towards spectators or towards yourself.
• Motor, flight control system and flight battery may heat up during operation of the model. For this reason, wait for 5
to 10 minutes before recharging or replacing the flight battery. The drive motor must have cooled down to ambient
temperature.
• Never switch off the remote control (transmitter) while the model is in use. After landing, always disconnect the flight
battery from the model first. It is only after this that the remote control may be turned off.
• In case of a defect or a malfunction, remove the problem before using the model again.
• Never expose your model or the remote control to direct sunlight or excessive heat for an extended period of time.
• After use, the flight battery must be disconnected from the model and the remote control switched off. Remove the
batteries from the transmitter for extended storage.