Reely Model car with remote control (9801) 9801 データシート

• Connect the plug of the battery/rechargeable battery holder or NiMH drive battery to the respective connection

cable in the vehicle.

• Insert the battery/rechargeable battery holder or the NiMH drive battery into the vehicle (cable/plug points in the

direction of the vehicle front). Place the cable and plug in the battery/rechargeable battery compartment.

• Close the battery/rechargeable battery compartment again. Observe that the cable between the battery/

rechargeable battery holder or the NiMH drive battery and the vehicle is not crushed or caught.

• Retighten the safety screw turned out in the beginning.

To drive with more than one vehicle on the same build in the near distance, you can choose one of three
channels on the transmitter.

For this, put the channel selection slider (11) in the position A, B or C with the transmitter switched off. If only one
vehicle is operated, the setting does not matter.

• Pull out the telescopic aerial all the way.

• First switch on the speed controller (put the on/off switch (5) in the „ON“ position). The left LED (3) at the

transmitter flashes slowly red.

• Switch on the vehicle (put the slider on the bottom in the „ON“ position).

• Briefly push the left button „A“ (9). The transmitter’s left LED (3) flashes quickly.

• Move the left control lever (2) all the way forwards once and back again. The left LED (3) at the transmitter now

flashes red permanently.

• Set the desired maximum speed with the left control lever (2). A multi-coloured bar display (4) shows the

respective set maximum speed by the number of bars.

• Moving the right control lever (7) forward, the drive starts up and the vehicle moves (for reversing, pull the

control lever (7) back.

Observe that the right control lever (7) only switches between „full throttle forward“, „stop“ and „full
throttle backward“. The speed setting is also made with the left control lever (2).

• Steer the vehicle with the right control lever. A direction indicator at the left and right of the vehicle indicates the

driving direction.

Steering can be switched between the following 4 functions by briefly pushing the four buttons to the left
and right of the telescopic aerial:

Button „1“ = front wheel steering

Button „2“ = front wheel and rear wheel steering in the same direction, vehicle is driving diagonal

Button „3“ = rear wheel steering

Button „4“ = front wheel and rear wheel steering opposite, small turning circle