Reely 1:10 RC model car Electric Truggy FS-53328-6 ユーザーズマニュアル

Install the rear shock tower "B". The two shock towers are shown in the
illustration on the right. The front shock tower "A" and the rear shock
tower "B" have different shapes.

Shock tower "B" is screwed to the rear differential using two tapping
screws "C" (thread length 10 mm).

Then the rear control arms prepared as described in
chapter 7. d) can be installed. The following parts are
required:

2x drive shafts "D"

2x shock absorbers "E"

2x screws M3x12mm "F"

2x plastic spacers "G"

2x tapping screws 12mm "H"

2x floating wheel axles "J"

2x ball bearings "K1"

2x upper bolts "L"

2x lower bolts "M"