Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 データシート
製品コード
6ED1057-3BA00-0AA8
LOGO! installation and wiring
2.2 Installing/removing LOGO!
LOGO!
32
Manual, 06/2014, A5E33039675
2.2
Installing/removing LOGO!
Dimensions
The LOGO! installation dimensions are compliant with DIN 43880.
LOGO! can be snap-mounted to 35 mm DIN rails according to EN 60715 or mounted on the
LOGO! can be snap-mounted to 35 mm DIN rails according to EN 60715 or mounted on the
wall with two M4 screws.
LOGO! width:
● LOGO! TDE has a width of 128.2 mm.
● LOGO! 0BA8 Base Modules have a width of 71.5 mm.
● LOGO! expansion modules have a width of 35.5 mm (DM8...) or 71.5 mm (DM16...).
LOGO! width:
● LOGO! TDE has a width of 128.2 mm.
● LOGO! 0BA8 Base Modules have a width of 71.5 mm.
● LOGO! expansion modules have a width of 35.5 mm (DM8...) or 71.5 mm (DM16...).
Note
The figures below show you an example of the installation and removal of a LOGO!
The figures below show you an example of the installation and removal of a LOGO!
12/24RCE and a digital module. The measures shown apply to all other LOGO! Base
Module versions and expansion modules.
WARNING
Risk to life when you touch live parts
Death or serious injury can result when you touch live parts.
Always switch off power before you remove or insert an expansion module.
Death or serious injury can result when you touch live parts.
Always switch off power before you remove or insert an expansion module.