Unold 58175 データシート
25
11. The following settings are possible
and can be set via the “+” and “-”
buttons:
buttons:
Level 1
60 °C
Level 2
80 °C
Level 3
100 °C
Level 4
120 °C
Level 5
140 °C
Level 6
160 °C
Level 7
180 °C
Level 8
200 °C
Level 9
220 °C
Level 10
240 °C
12. If there is no pot or pan on the
burner, a signal tone sounds at
intervals, the display shows E 0
and the appliance automatically
switches off after 30 seconds.
intervals, the display shows E 0
and the appliance automatically
switches off after 30 seconds.
13. The appliance can be switched
off at any time during the cooking
process by pressing the EIN/AUS
button.
process by pressing the EIN/AUS
button.
14. The settings made are not saved
at the end of the program or if the
program is cancelled.
program is cancelled.
15. The fan continues to run for
approx. 30 seconds after the end
of the program.
of the program.
16. If the program is not controlled via
the time selection, the appliance
automatically switches off after
two hours at the latest.
automatically switches off after
two hours at the latest.
17. After use, unplug the power plug
from the electrical outlet to save
energy.
energy.
18. Caution: Do not leave the appli-
ance unattended while you are
cooking with it.
cooking with it.
CAUTION:
The glass cooktop can become
hot from the heat radiated from
pots or pans. Therefore, do not
touch the surface immediately
after cooking.
The glass cooktop can become
hot from the heat radiated from
pots or pans. Therefore, do not
touch the surface immediately
after cooking.
LOCK FUNCTION/BUTTON LOCK
The appliance can be locked to pre-
vent unintentional operation of the ap-
pliance.
vent unintentional operation of the ap-
pliance.
Switching on the lock function:
1. Simultaneously tap the “+” and
1. Simultaneously tap the “+” and
“-” buttons.
2. When “L” is shown in the display,
the lock function is active. The
display will then alternately show
the selected temperature or power
level and “L”. Settings can no lon-
ger be made. Only the EIN/AUS
button can be activated to switch
off the appliance
display will then alternately show
the selected temperature or power
level and “L”. Settings can no lon-
ger be made. Only the EIN/AUS
button can be activated to switch
off the appliance
Switching off the lock function
3. Simultaneously tap the “+” and
3. Simultaneously tap the “+” and
“-” buttons again. When only
the selected temperature level or
power level is displayed, the lock
function is switched off.
the selected temperature level or
power level is displayed, the lock
function is switched off.
4. Note: As soon as the appliance is
disconnected from the mains, the
lock function is no longer swit-
ched on; if necessary it must be
activated again.
lock function is no longer swit-
ched on; if necessary it must be
activated again.