ABUS Privest Wireless Alarm Base Set, DE FU9000 データシート

21 

When you deactivate the ABUS wireless alarm system, the system sensors are disarmed. 
The triggering of a sensor no longer results in an alarm.  
Exceptions: Smoke detectors, sensors you have defined as door chimes, and all detectors 
integrated in zones that are monitored 24 hours a day. For detailed information about 
detectors that can also trigger when deactivated, refer to the installation manual. This 
chapter tells you the different ways of deactivating the ABUS wireless alarm system.  
If defined, deactivation is confirmed by a local announcement.  

 

If you enter the wrong PIN during deactivation, the operating panel emits 3 brief tone 
signals. You hear the voice message “Fail to disarm. Wrong Code. Please try agan.” 

 
You can deactivate 2 different elements. You can: 
- 

deactivate the complete system 

- deactivate 

partitions 

In addition to entering the user PIN and pressing the control buttons, there are two other 
ways of deactivating the system: 
- 

deactivation under duress (silent alarm) 

- silencing 

an 

alarm 

Geben Sie Ihren Benutzer PIN ein und drücken Sie die 

 Taste. All partitions 

assigned to this PIN are now deactivated.  

 

If your are outside your home and the ABUS wireless alarm system is activated, enter 
your home only via the zone to which you have assigned the property “entry and exit 
delay” (see section 1.1). This is usually your entrance door. When this zone triggers, no 
alarm is set off at first – only the operating panel begins to beep. This informs you that 
entry delay time countdown has started. You also hear the following message: "System 
in disarm process. Please enter your code.” Before the entry delay time expires, you 

have to enter your user PIN and press 

. Otherwise, an alarm is triggered.