ABUS Privest Wireless Alarm Base Set, DE FU9000 データシート

22 

1.  Select the partition you want to deactivate. Do this by pressing 

 and 

entering the partition number [1/2/3]. 

2.  Enter your user PIN and press 

. You hear the following announcement: 

“{System / [partition x]} disarmed”. 

 
3.  Repeat these steps to deactivate further partitions. 

 
 
Example:  
To deactivate partition 3 with user PIN 1-2-3-4, press the following: 
 

3

   1-2-3-4  

 

If the ACTIVE LED flashes following deactivation, check the display for activated 
(alarmed) zones. 

 

 
With the ABUS wireless alarm system, you can deactivate the system with a forced 
code. If you enter the duress PIN, your alarm system is deactivated as normal, but 
simultaneously a silent alarm is triggered. This alarm is transmitted to an emergency 
command centre and must therefore never be triggered arbitrarily or accidentally. The 
duress PIN is used if you are forced by someone else to deactivate the system.  
To use the duress PIN, just add 1 to the last digit of your user PIN (see the examples in 
the following table). 
 

1-2-3-4 1-2-3-5 
5-6-7-8 5-6-7-9 
6-7-8-9 6-7-8-0 

 

 

IMPORTANT: 

Never perform a forced deactivation with the duress PIN arbitrarily or for no special 
reason. Emergency command centres take this very seriously and act fast!