Canon DR-F120 9017B003 データシート

製品コード
9017B003
ページ / 77
22
Chapter 5  Placing Documents
There are two methods of scanning documents using this scanner.
Documents
The scanner can scan documents ranging in size from business 
cards and checks to A4/LTR/LGL. The document sizes that this 
scanner can scan are shown below.
Documents
The scanner can scan documents of the following sizes:
Feeder
Flatbed (Platen Glass)
Make sure to thoroughly read the following cautions for scanning documents
using the feeder:
 When scanning a stack of documents using the feeder, make 
sure that the documents are of the same size, stock, and paper 
quality. Feeding documents of different sizes or types together 
may cause a paper jam.
 Always make sure that the ink on a document is dry before 
scanning it. Scanning documents with the ink still wet may soil 
the rollers or scanning glass, cause lines or smudges to appear 
on images, or dirty other documents.
 Always clean the rollers or scanning glass after scanning a doc-
ument written in pencil. Scanning documents with pencil written 
on them may soil the rollers or scanning glass, cause stripes to 
appear in images, or dirty other documents.
 When scanning a two-sided document that is printed on thin 
paper, the image on the opposite side of each page may show 
Width:
51 mm to 216 mm (2" to 8.5")
Length:
89 mm to 356 mm (3.5" to 14.0")
(You can scan documents up to 1,000 mm (39.3") long by 
setting the scanner to the Long Document mode.)
Thickness:  35 to 128 g/m
2
Capacity:
50 sheets or stacked to a height of 6.0 mm (0.2")
(including curling)
Width:
216 mm (8.5")
Length:
356 mm (14")