Unold 48806 データシート

ページ / 72
21
PrEParation of icE crEam
1.  Prepare the ingredients for the ice 
cream as described in the recipe. 
If  the  ice  cream  mass  needs  to 
be  cooked  before  you  can  use  it 
further, please do so the previous 
day to allow it to cool thoroughly.
2.  Cool  the  prepared  ice  cream 
mass  or  the  required  ingredients 
down  to  refrigerator  temperature 
(approx. 6-8 °C).
3.  Purée fruit directly before prepa-
ration, and add fruit chunks only 
towards  the  end  of  the  prepara-
tion process.
4.  Add alcohol only carefully and in 
small amounts towards the end of 
the freezing time because alcohol 
lengthens the freezing time.
5.  Place  the  removable  ice  cream 
bowl  into  the  corresponding 
indentation  in  the  compressor 
casing (4).
6.  Place the blender (2) exactly onto 
the  spindle  protruding  from  the 
bottom of the ice cream bowl (3).
7.  Pour  the  cooled  ingredients  into 
the  removable  ice  cream  bowl. 
It is important not to exceed the 
maximum filling capacity.  Do not 
fill  the  ice  cream  bowl  comple-
tely  (only  up  to  3/4  of  the  max. 
capacity)  because  the  ice  cream 
will  expand  during  the  freezing 
process.
8.  Place  the  lid  on  the  ice  cream 
bowl.
9.  Plug in the appliance and switch 
it  on  using  the  ON/OFF  switch. 
“60:00”  will  appear  on  the  dis-
play.  The  appliance  is  ready  for 
operation.
10.  If  necessary,  adjust  the  timing 
in 10 minute steps (10, 20, 30, 
40,50  or  60  minutes)  by  repea-
tedly  pressing  the  time  selection 
button.
11.  Press  the  START/STOP  button. 
The  app-liance  will  start  stirring 
the ingredients. The green control 
lamp “Stir” lights up.
12.  Cooling  will  automatically  begin 
approximately  2  minutes  later 
and  the  red  control  lamp  “Cool” 
will light up.
13.  The display switches between the 
remaining  time  and  the  current 
temperature in the appliance.
14.  During  operation,  you  can  sus-
pend  the  stirring  process  at  any 
time by pressing the START/STOP 
button.  Stirring  can  be  resumed 
by pressing the START/STOP but-
ton again.
15.  During operation, you can extend 
the  operating  time  by  pressing 
the  time  selection  button.  The 
operating  time  can  be  extended 
in 5-minute steps, up to a maxi-
mum of 60 minutes.
16.  At  the  end  of  the  time  set,  the 
appliance  switches  off  automati-
cally and an acoustic signal beeps 
10 times. “0:00” is shown on the 
display.
17.  If  the  ice  cream  is  not  removed 
within  10  minutes  of  the  sound-
ing of the completion signal, the 
cooling  function  will  automati-
Control lamp  
KÜHLEN/Cooling
START/STOP
ZEITWAHL/Time selection
ON/OFF
Control lamp   
RÜHREN/Mixing