ABUS TVAC15000 データシート

 

 

37

 

6.6 System settings 
 

 

Use the ◄► buttons to switch the quad display 
on (ON) or off. 
To activate quad mode, all the cameras have to 
be activated. 
 
When in quad display, you can use the arrow 
buttons to switch directly to full-screen view for 
individual cameras. 
▲ = camera1;  
▼ = camera2;  
◄ = camera3;  
► = camera4 
 
Note that the cameras that are hidden are not 
shown in the quad display. 
 
Warning: 
Only the full screen of the triggering channel 
is recorded. 
To record from all 4 cameras using motion 
detection, quad display has to be activated. 

You can define the dwell time for sequence 
display here. Use the ◄► buttons to choose 
between OFF/5 sec/10 sec/15 sec. 
If you are not using cameras, hide them in order 
to display only the occupied channel. 
To switch off sequence display, press the 
CH+/CH button. If you want to start manual 
recording, press REC. 
 
Warning: 
Note that motion detection is only activated 
for the channel that is currently displayed.

 

 

Press the ► button to switch between 
year/month/day/hours/minutes. 
Use the ▲▼ buttons to change the values. 
Confirm your input with OK.