Intel R2000BB4GS9 データシート
Intel
®
Server System R2000BB Product Family TPS
Revision 2.0
31
• Riser cards can support a maximum combined (all PCIe slots) power draw of up to 75W. Add-in cards
with power requirements above 75W will require the additional power to be drawn from either of two
2x2 pin “OPT_12V_ PWR” connectors on the server board. Power cables for these connectors are
included in the A2UL16RISER accessory kit and can support both 6 and 8 pin 12V AUX power
connectors located on the add-in cards. See section 3.3.2 Riser Card Power Connectors, for the
Optional12V power connector usage and power cable specification.
2x2 pin “OPT_12V_ PWR” connectors on the server board. Power cables for these connectors are
included in the A2UL16RISER accessory kit and can support both 6 and 8 pin 12V AUX power
connectors located on the add-in cards. See section 3.3.2 Riser Card Power Connectors, for the
Optional12V power connector usage and power cable specification.
• NOTE: The latest posted system software updates must be installed on the system to ensure proper
fan speed control is enabled. The latest system update package can be downloaded from the following
Intel web site: http://downloadcenter.intel.com
Intel web site: http://downloadcenter.intel.com
5.2 Intel
®
Xeon Phi™ Coprocessor Card – System Configuration Requirements
Intel highly recommends that the latest available system software be installed. The latest system update
package can be downloaded from the following Intel web site:
package can be downloaded from the following Intel web site:
• The following <F2> BIOS Setup Utility Options must be set as follows:
o
MMIO over 4GB = Enabled
o
MMIO Size = 256GB