Intel R2000BB4GS9 データシート
Intel
®
Server System R2000BB Product Family TPS
Revision 2.0
37
Light pipes integrated into the drive tray assembly direct light emitted from Amber drive status and Green
activity LEDs located next to each drive connector on the backplane, to the drive tray faceplate, making them
visible from the front of the system.
activity LEDs located next to each drive connector on the backplane, to the drive tray faceplate, making them
visible from the front of the system.
Amber
Off
No access and no fault
Solid On Hard Drive Fault has occured
Blink
Blink
RAID rebuild in progress (1 Hz), Identify (2 Hz)
Green
Condition
Drive Type
Behavior
Power on with no drive activity
SAS
LED stays on
SATA
LED stays off
Power on with drive activity
SAS
LED blinks off when processing a command
SATA
LED blinks on when processing a command
Power on and drive spun down
SAS
LED stays off
SATA
LED stays off
Power on and drive spinning up
SAS
LED blinks
SATA
LED stays off
6.2.1
3.5” Drive Hot-Swap Backplane Overview
Systems with 8 or 12 drive configurations have their own unique backplane. Both 8 and 12 drive backplanes
share identical features. The following will be used to describe the features of both backplanes. Differences
between the two will be noted.
The backplanes mount to the back of the drive bay assembly.
share identical features. The following will be used to describe the features of both backplanes. Differences
between the two will be noted.
The backplanes mount to the back of the drive bay assembly.
On the front side of each back plane are mounted eight or twelve hard disk drive interface connectors, each
providing both power and I/O signals to attached hard disk drives.
Amber Status LED
Green Activity LED
Green Activity LED