Patton electronic SL4050/10 ユーザーズマニュアル

Call Waiting
Click to 

 or 

 call waiting.

Anonymous Call
Select how much information about the SIP phone user will be sent to the called party’s phone:

•

Disable—If 

 is selected, full URI and name are sent to the receiver’s phone when the user makes a 

phone call. The URI and name of the caller are displayed on the receiver’s phone. 

•

Full URI—If 

 is selected, only user name is displayed on the receiver’s phone when the user makes 

a phone call. 

•

Display Name—If 

 is selected, only name is displayed on the receiver’s phone when the user 

makes a phone call.

Anonymous Call Reject
Click 

 to reject anonymous calls. Click 

 to accept anonymous calls.

Call Forward
Select how call forwarding is handled:

•

No Answer—Click 

 to enable call forwarding to another number when no one answers the 

phone after 180 seconds (default). The timer can be changed from 0–600 seconds (see section 

change the timer setting). Enter the call forwarding number in the text box.

•

Busy—Click 

 to enable call forward to another number when user is busy on the phone. Enter the call 

forwarding number in the text box.

•

Unconditional—Click 

 to transfer all incoming calls to another number. Enter the call for-

warding number in the text box.

NTP Recycle
NTP recycle time.

Inter Digit
The time interval that the IP phone waits to detect the end of DTMF digits. No more digits are accepted after 
this period and the phone begins to dial.

Originating Not Accept 
The time interval that the caller’s phone waits to establish a call. If the receiver fails to answer the phone during 
this time interval, the caller’s phone will automatically disconnect.

Incoming No Answer 
The time interval that the receiver’s phone will ring. If the receiver fails to answer the phone during this time 
interval, the phone will automatically disconnect.

Hold Recall
The time interval that the caller is put on hold before the phone automatically disconnect.