AstroStart Security System VSS-113 ユーザーズマニュアル

© 2006 A

STROFLEX 

E

LECTRONICS 

– A

LL RIGHTS RESERVED

 

8 

S

YSTEM STATUS CHIRPS 

 

The siren will chirp when arming/disarming the system. The pattern of chirps will audibly report 

the system’s status as described below. 

Arm 1 

System 

armed 

Arm 

1 (3 second delay), 1 

System armed with zone active 

Disarm 2 

System 

disarmed 

Disarm 

4 

System disarmed with zone violation report 

Disarm 

5 

System disarmed NPC

®

 active 

T

ABLE OF ZONES

 

The zone number is the number of LED flashes used by the system to identify that input. The 

standard input assignments are listed below, along with spaces to write in any optional sensors or 

switches you have had installed. 

1 

Used for hood/trunk pin-switches 

 

2 

An impact was detected by the shock sensor 

 

3 

Door switch trigger 

 

4 Optional 

sensors  

5 Ignition 

trigger  

I

NTERPRETING ZONE DIAGNOSTICS

 

Warn Away responses are not reported by arming or disarming diagnostics. If you receive a 

Bypass notification when arming or a Tamper Alert notification when disarming, look at the LED. 

Active or triggered zones will be indicated by a pattern of blinks by the LED.  

 

Example 

If zone 3 was active or triggered, the LED will blink three times with a two-second pause. Then it 

will blink three times again, and repeat until the ignition is turned on. 

Note: Your system stores the last two triggered zones in memory. If your system has  

been triggered but the LED has been reset by turning on the ignition, your dealer can 

still recall the last two zones that were triggered. Contact your dealer for details.