AstroStart Security System VSS-113 ユーザーズマニュアル

security system will not arm, even with the remote transmitter, but all convenience functions

(door locks, trunk release, etc.) will continue to work normally.

To enter or exit Valet

Mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

switch within 10 seconds.

To enter or exit Valet Mode using the transmitter:

1. Open any vehicle door.

2. Press .

3. Press or

4. Press again.

The status LED will light solidly if you are entering Valet Mode, and it will go out if you are exiting

Valet Mode.

UISANCE PREVENTION

CIRCUITRY

Your system has Nuisance Prevention

Circuitry (NPC

). It prevents annoying repetitive trigger

sequences due to faulty door pin switches or environmental conditions such as thunder,

jackhammers, airport noise, etc.

Example

If the alarm triggers three times within a 60-minute period and each time the same sensor or

switch triggers the alarm, NPC

will interpret those triggers as false alarms. After the third trigger,

NPC

ignores, or bypasses, that sensor or switch (along with any other sensors or switches sharing

the same zone) for 60 minutes. If the bypassed sensor tries to trigger the system while it is being

bypassed, the 60-minute bypass period will start over. This ensures that a sensor that continually

triggers will remain bypassed.

STROFLEX

LECTRONICS

– A