West Elm Finn Pendant 組み立て手順
Important Safety Instructions:
•These instructions are provided for your safety. It is very important that they are read carefully and completely be
fore beginning the installation of this lighting fi xture.
•THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
•We strongly recommend that a professional electrician install all direct wire fi xtures.
•This fi xture has been rated for up to (3) 60-Watt maximum Type A standard incandescent light bulbs (not
included) or 13-watt compact fl uorescent bulb (not included). To avoid the risk of fi re, do not exceed the
recommended lamp wattage.
•The lighting fi xture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical
supply systems (provided with Ground wire or equivalent protection system).
• Save this instruction.
•These instructions are provided for your safety. It is very important that they are read carefully and completely be
fore beginning the installation of this lighting fi xture.
•THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODES BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
•We strongly recommend that a professional electrician install all direct wire fi xtures.
•This fi xture has been rated for up to (3) 60-Watt maximum Type A standard incandescent light bulbs (not
included) or 13-watt compact fl uorescent bulb (not included). To avoid the risk of fi re, do not exceed the
recommended lamp wattage.
•The lighting fi xture is meant for indoor use. It must be connected only to 3-wire, single-phase electrical
supply systems (provided with Ground wire or equivalent protection system).
• Save this instruction.
WARNING:
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allowing it to
cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
SHUT OFF ALL THE MAIN ELECTRICAL SUPPLY FROM THE FUSE BOX / CIRCUIT BREAKER
• To reduce the risk of fi re, electrical shock or personal injury, always turn off light fi xture and unplug, allowing it to
cool prior to replacing light bulb.
• Do not touch bulb when fi xture is turned on.
• Do not look directly at lit bulb. Keep fl ammable materials away from lit bulb.
SHUT OFF ALL THE MAIN ELECTRICAL SUPPLY FROM THE FUSE BOX / CIRCUIT BREAKER
Pre-assembly:
•Remove all parts and hardware from box along with any plastic protective packaging. Do not discard any contents
until after assembly is complete to avoid accidentally discarding small parts or hardware.
•Remove all parts and hardware from box along with any plastic protective packaging. Do not discard any contents
until after assembly is complete to avoid accidentally discarding small parts or hardware.
PARTS INCLUDED: HARDWARE ENCLOSED: TOOLS REQUIRED (not included)
(1)Mounting Plate (A) (3) Plastic wire connectors (a) 1. Electrical tape
(1)Canopy (B) (2) Mounting screws (b) 2. Screwdriver
(1)Socket (C) (1) Green ground screw (c) 3. Two people recommended
(1)Shade (D) (4) Flat head screws (d)
(1)Socket Cup (E)
(1) Shade Ring (F)
(1)Mounting Plate (A) (3) Plastic wire connectors (a) 1. Electrical tape
(1)Canopy (B) (2) Mounting screws (b) 2. Screwdriver
(1)Socket (C) (1) Green ground screw (c) 3. Two people recommended
(1)Shade (D) (4) Flat head screws (d)
(1)Socket Cup (E)
(1) Shade Ring (F)