West Elm Finn Pendant 組み立て手順
To Assemble:
1. Carefully unpack all fi xture parts and hardware and lay them on a clean workspace.
2. Gently pull wiring down from ceiling junction box. Loosen the allen set screw on the canopy with the tool
provided and adjust the length of cord to achieve the desired hanging length. Tighten the allen set screw.
Cut off excess wire.
3. Carefully inspect the pendant’s fi xture wires. The NEUTRAL FIXTURE WIRE is marked in “N”. The HOT FIX
TURE WIRE is marked in “L”. And the GROUND WIRE is marked “Earth”.
4. Attach the Ground Wire from the fi xture to the Ground Junction Box Wire from the outlet (usually green or
bare wire). Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical
tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE, be sure
to insert the Green Ground Screw (c) into the Mounting Plate (A) facing DOWN, and wrap the fi xture’s bare
ground bare ground wire around the Green Ground Screw (c). IT IS IMPERATIVE THAT THE OUTLET BOX
IN YOUR HOME BE PROPERLY GROUNDED.
5. Connect the NEUTRAL FIXTURE WIRE (Marked “N”) to the NEUTRAL JUNCTION BOX WIRE (usually white).
Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical tape. Be
sure no wire strands are exposed.
6. Connect the HOT FIXTURE WIRE (Marked “L”) to the HOT JUNCTION BOX WIRE (usually black).
Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical tape. Be
sure no wire strands are exposed. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY
WILL BE COMPROMISED.
7. Gently tuck the wire connections neatly into the ceiling junction box.
8. Attach the Mounting Plate (A) to the ceiling outlet box using the enclosed Mounting Screws (b). Tighten
screws with a screwdriver.
9. Pull Canopy (B) up over the Mounting Plate (A), align the holes in the Mounting Plate (A) with the
holes in the Canopy (B).
10. Insert the Flat Head Screws (d) and tighten with a screwdriver.
11. Unscrew the Shade Ring (F) from the Socket (C), place the Shade (D) onto the Socket (C), and attach
the Socket Cup (E) around the Socket (C), then secure it by turning the Shade Ring (F) in a clockwise
direction.
12. Insert a bulb-Max 60 watt maximum TYPE A standard incandescent light bulb (not included) or 13-watt
compact fl uorescent bulb (not included) into the socket (B). DO NOT EXCEED SPECIFIED WATTAGE.
13. Restore power to junction box and test fi xture.
1. Carefully unpack all fi xture parts and hardware and lay them on a clean workspace.
2. Gently pull wiring down from ceiling junction box. Loosen the allen set screw on the canopy with the tool
provided and adjust the length of cord to achieve the desired hanging length. Tighten the allen set screw.
Cut off excess wire.
3. Carefully inspect the pendant’s fi xture wires. The NEUTRAL FIXTURE WIRE is marked in “N”. The HOT FIX
TURE WIRE is marked in “L”. And the GROUND WIRE is marked “Earth”.
4. Attach the Ground Wire from the fi xture to the Ground Junction Box Wire from the outlet (usually green or
bare wire). Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical
tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND WIRE, be sure
to insert the Green Ground Screw (c) into the Mounting Plate (A) facing DOWN, and wrap the fi xture’s bare
ground bare ground wire around the Green Ground Screw (c). IT IS IMPERATIVE THAT THE OUTLET BOX
IN YOUR HOME BE PROPERLY GROUNDED.
5. Connect the NEUTRAL FIXTURE WIRE (Marked “N”) to the NEUTRAL JUNCTION BOX WIRE (usually white).
Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical tape. Be
sure no wire strands are exposed.
6. Connect the HOT FIXTURE WIRE (Marked “L”) to the HOT JUNCTION BOX WIRE (usually black).
Fasten each together with a Plastic Wire Connector (a) and wrap the connection with electrical tape. Be
sure no wire strands are exposed. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY
WILL BE COMPROMISED.
7. Gently tuck the wire connections neatly into the ceiling junction box.
8. Attach the Mounting Plate (A) to the ceiling outlet box using the enclosed Mounting Screws (b). Tighten
screws with a screwdriver.
9. Pull Canopy (B) up over the Mounting Plate (A), align the holes in the Mounting Plate (A) with the
holes in the Canopy (B).
10. Insert the Flat Head Screws (d) and tighten with a screwdriver.
11. Unscrew the Shade Ring (F) from the Socket (C), place the Shade (D) onto the Socket (C), and attach
the Socket Cup (E) around the Socket (C), then secure it by turning the Shade Ring (F) in a clockwise
direction.
12. Insert a bulb-Max 60 watt maximum TYPE A standard incandescent light bulb (not included) or 13-watt
compact fl uorescent bulb (not included) into the socket (B). DO NOT EXCEED SPECIFIED WATTAGE.
13. Restore power to junction box and test fi xture.
Care instructions:
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fi xture’s
fi nish.
• Wipe clean with a soft, dry cloth or static duster.
• Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fi xture’s
fi nish.