Radio Shack 16-3313 ユーザーズマニュアル

• When you stop playing a disc, the DVD player 

remembers where you stopped.

• When you press 

g

 to start playing the disc 

again, the player picks up where you left off unless 
you press STOP 

D

 again, removed the disc, or 

unplugged the DVD player.

9. To turn off the DVD player, press 

on the DVD 

player. The DVD player’s POWER indicator turns off.

To remove a disc, use your thumb to hold down the spindle 
while placing other fingers on the recess at the upper right 
and lifting up the edge of the disc.

You can connect your DVD player to a TV, a TV and Audio/
Video receiver, a camcorder, a game system console, or a 
digital camera.

Position cables properly to avoid audio 
interference.

• Insert each cable firmly into the 

designated jack.

• If you place components above the TV, 

route all cables down the side of the 
back of the TV instead of straight 
down the middle of the back of the TV.

• If your antenna uses 300-ohm twin 

lead cables, do not coil the cables. 
Also, keep the twin lead cables away 
from audio/video cables.

1. Connect the supplied A/V cable’s two-

plug end to the 

jacks on the back of the DVD player. 
The yellow plug is 

. Black is 

.

2. Connect the supplied A/V cable’s 

three-plug end to an A/V cable (not 
supplied) connected to your TV. Match 
the cable by color code if possible.