Radio Shack 16-3313 ユーザーズマニュアル

1. Make sure the DVD player is securely fastened in the 

carrying case.

2. Pull down the panel on the back of the carrying case 

and reattach it, aligning the velcro strip to the catch 
panel.

3. Attach one of the supplied straps to the carrying case 

and hang the strap over the back of the headrest.

4. Attach one strap to each loop on the bottom of each 

side of the carrying case.

5. Wrap the straps around the bottom front of your seat 

and attach them together. The configuration varies 
depending on your car seat.

6. Secure the DVD player by adjusting the straps to the 

appropriate length for your car seat.

You can power the DVD player from your vehicle’s 12V 
power source (such as a cigarette-lighter socket) using the 
supplied DC adapter. 



1. Unzip the middle zipper on the carrying case to insert 

the adapter plug into the jack.

2. Connect the supplied DC adapter cord’s barrel plug to 

the

jack on the back of the DVD player. 

3. Connect the other end of the adapter to the vehicle’s 

cigarette lighter socket. 

The DVD player has two 

1

/

8

-inch (3.5 mm) headphones 

jacks on the right side of the screen panel for private 
listening. Connect the supplied stereo headphones’ 

1

/

8

inch (3.5 mm) plug(s) into the 

s

 and/or 

s

 jack(s).

Ô





• You must use a power source 

that supplies 9V–12V DC and 
delivers at least 1.2A. Its center 
tip must be set to positive and its
plug must fit the DVD player's 
DC IN 9V–12V jack. The 
supplied adapter meets these 
specifications. Using an adapter
that does not meet these 
specifications could damage the
DVD player or the adapter.

To avoid draining your car’s 
battery power, do not leave the 
DVD player on or the DC adapter 
connected to the cigarette lighter 
when your vehicle is not running.

Ô

Ô

The built-in speakers are disabled 
when you plug a headphone into 

s

1, but not when you plug a 

headphone into 

s

2.